1984 - 2007
HONDA CR 250 R
Rear sprocket twinring
| RENTHAL
Fits to:
HONDA CR250R [1992 - 1995]
HONDA CR 250 R [2007 - 2007]
HONDA CR 250 R [2005 - 2005]
HONDA CR 250 R [1993 - 1993]
HONDA CR 250 R [1992 - 1992]
HONDA CR 250 R [2004 - 2004]
HONDA CR 250 R [1991 - 1991]
HONDA CR 250 R [1990 - 1990]
HONDA CR 250 R [1989 - 1989]
HONDA CR 250 R [1988 - 1988]
HONDA CR 250 R [1987 - 1987]
HONDA CR 250 R [1984 - 1984]
HONDA CR 250 R [1986 - 1986]
HONDA CR 250 R [1985 - 1985]
HONDA CR 250 R [2006 - 2006]
HONDA CR 250 R [2001 - 2001]
HONDA CR 250 R [2000 - 2000]
HONDA CR 250 R [2003 - 2003]
HONDA CR 250 R [1997 - 1997]
HONDA CR 250 R [1996 - 1996]
HONDA CR 250 R [1994 - 1994]
HONDA CR 250 R [1995 - 1995]
HONDA CR 250 R [2002 - 2002]
HONDA CR 250 R [1998 - 1998]
HONDA CR 250 R [1999 - 1999]
1989 - 1993 HONDA CR 250 R
Transmision ratio:
| 12 | 13 | 14 | 15 | ||
| 38 | 3.17 -16.0% | 2.92 -22.4% | 2.71 -28.0% | 2.53 -32.8% | |
| 39 | 3.25 -13.8% | 3.00 -20.4% | 2.79 -26.1% | 2.60 -31.0% | |
| 40 | 3.33 -11.6% | 3.08 -18.4% | 2.86 -24.2% | 2.67 -29.3% | |
| 42 | 3.50 -7.1% | 3.23 -14.3% | 3.00 -20.4% | 2.80 -25.7% | |
| 43 | 3.58 -4.9% | 3.31 -12.2% | 3.07 -18.5% | 2.87 -23.9% | |
| 44 | 3.67 -2.7% | 3.38 -10.2% | 3.14 -16.6% | 2.93 -22.2% | |
| 45 | 3.75 -0.5% | 3.46 -8.2% | 3.21 -14.7% | 3.00 -20.4% | |
| 46 | 3.83 +1.7% | 3.54 -6.1% | 3.29 -12.8% | 3.07 -18.6% | |
| 47 | 3.92 +3.9% | 3.62 -4.1% | 3.36 -10.9% | 3.13 -16.9% | |
| 48 | 4.00 +6.1% | 3.69 -2.0% | 3.43 -9.0% | 3.20 -15.1% | |
| 49 | 4.08 +8.3% | 3.77 standard | 3.50 -7.1% | 3.27 -13.3% | |
| 50 | 4.17 +10.5% | 3.85 +2.0% | 3.57 -5.2% | 3.33 -11.6% | |
| 51 | 4.25 +12.8% | 3.92 +4.1% | 3.64 -3.4% | 3.40 -9.8% | |
| 52 | 4.33 +15.0% | 4.00 +6.1% | 3.71 -1.5% | 3.47 -8.0% | |
| 53 | 4.42 +17.2% | 4.08 +8.2% | 3.79 +0.4% | 3.53 -6.3% | |
| 54 | 4.50 +19.4% | 4.15 +10.2% | 3.86 +2.3% | 3.60 -4.5% | |
| 55 | 4.58 +21.6% | 4.23 +12.2% | 3.93 +4.2% | 3.67 -2.7% | |
Specifications
| Manufacturer | RENTHAL |
|---|---|
| Chain size | 520 |
| Color/finish | Red |
| Material | 7075-T6 Aluminum |
| Mounting position | Rear |
| Tooth count | 48 |
| Type | Drive |
| Units | Each |
| Width | 300.000 |
| Height | 15.000 |
| Length | 330.000 |
| Tooth count | 49 |
Product description
Inner ring is the same high strength Ultralight™ 7075 T-6 aluminum used for the standard Renthal sprocket
Outer ring is electro-less nickel coated steel for ultimate durability and is designed with the minimum amount of material to keep weight down
The outer ring is expanded at 200°C and then fitted over the inner; this interference fit combined with the wave pattern ensures a permanent bond for the life of the chainwheel
The flat socket head screws add additional strength to the chainwheel during side impacts and eliminates contact with the chain guide
Self cleaning mud grooves between each tooth prevent dirt build upand reduce chainwheel wear and weight
Will outlast a standard all aluminum sprocket by 3 times, yet is much lighter than an all steel rear sprocket